Industrial Wall Mount Controllers/Recorder

INDUSTRIAL WALL MOUNT CONTROLLERS / RECORDER
For pH, ORP or CONDUCTIVITY

IPHR Monitor/Recorder and IPRC Controller/Recorder

IPHR Monitor/Recorder &
IPRC Controller/Recorder

IPHR / IPRC SERIES
Measure, Control and Record pH and Conductivity or ORP
NEMA Box Enclosure Single or Dual Input with Paper Recorder
Display 4 Digit LED 13.7 mm (0.54")
Microprocessor Based Versatility
Compact Panel Design

The IPHR/IPRC Series of recorders and controllers provides a reliable method of monitoring and controlling while recording pH, ORP and conductivity for various industrial and chemical processes. Features impressive list of standard features which includes NEMA-4X enclosure, digital display, paper data logging, relay output and manual or automatic temperature compensation.

This Series also features an inkless pressure sensitive paper recorder. The pressure sensitive recorder and controller will record upto 30 days of process data. Choose between either a single or dual parameter monitoring system of pH, Conductivity or ORP.

The pH, conductivity and ORP controllers are a new microprocessor based design featuring manual or automatic temperature compensation, two mechanical relays for on-off control, digital display of either pH, conductivity, ORP or temperature, calibration and parameter setpoints are programmable through the front keypad.

IPRCD Dual Channel Controller/Recorders
IPRCD-PH-CD Dual Channel Controller/Recorder

IPRCD-PH-CD
Wall Mounted pH Conductivity Controller and Recorder
IPRCD-PH-CD Wall Mounted pH Conductivity Controller/Recorder

Electrodes Sold Separately
SPECIFICATIONS - COMMON
Control Outputs: 2 SPDT 6 amp relays, programmable for active above or below setpoint latch or non-latching
Power: 115 Vac 50/60 Hz; 230 Vac optional

pH CONTROLLER
Range: pH 0-14; Temperature 0-100ºC
Resolution: pH 0.01; Temperature 0.1ºC
Accuracy: pH 0.01; Temperature: ▒0.1ºC
Display: 4 Digit red LED 13.7 mm (0.54")
Temperature Compensation: Manual or automatic 0-100ºC using Pt100 ohm RTD
Connector: pH-BNC; Temperature-Miniature phone plug or terminal strip
ORP Controller: Range: ▒2 Vdc
Display: 4 Digit red LED 13.7 mm (0.54")
Resolution: 0.1, 0.1 mV
Accuracy: 0.1 mV @25ºC
Decimal Point: 2 position autoranging

CONDUCTIVITY CONTROLLER
Range: Conductivity: 1 ╡SC/cm - 1S/cm autoranging decimal point dependent
Temperature: -10 to +130ºC (26 to 266ºF)
Display: 4 Digit green LED 13.7 mm (0.54")
Resolution: Conductivity: 1╡S;
Temperature: 0.1º

Accuracy
Conductivity: 1% of reading;
Temperature: 0.5ºC

Repeatability: 1╡S
Units of Measure: Conductivity ╡S or mS dissolved solids TPM, PPM, Temperature ºC or ºF Cell Constant: 0.01+59.99 user programmable
Temperature Compensation: Manual, Automatic using 100 ohm platinum RTD DIN

PAPER RECORDER
Range: 2-12 pH
Resolution: ▒0.2 pH/lateral chart deviation
Accuracy: ▒0.2 pH
Temperature Compensation: Manual supplied with fixed resistor. Automatic 1000 ohm platinum RTD

INPUT TYPE

Input Code	Description	Range
PH	pH controller with temperature compensation	0-14 pH; 0-100ºC
CD	Conductivity controller with temperature compensation	1 ╡SC/cm - 1S/cm autoranging
ORP	ORP controller	▒2 Vdc

To Order (Specify Model No.) Prices shown in U.S. Dollars

Model No.	Description	Price
*IPHR-( )**	Single input monitor and paper recorder	$995
*IPRC-( )**	Single input controller and paper recorder	$1450
*IPRCD-( )-( * )**	Two controllers and two channel paper recorder	$1950
BPR-212*	Battery powered pH recorder; see page G-21	$995

( * ) Specify input code: "PH" (pH controller), "CD" (conductivity controller), "ORP" (ORP controller)
Note: for 230 Vac power add ô-230ö suffix to model number, no additional charge.
*Available with range 2-12 or 0-14.
Ordering Example: IPRCD-PH-CD, two channel pH and conductivity controller/recorder, $1950.